|
All of my calls are hand
turned without the use of any jigs or duplicators. I also personalize the call per the customers request.
Be sure to check out my "Currently Available Calls" area, since
it is updated weekly when necessary. There is a flat
$5.00 shipping charge for all orders regardless of the number of calls ordered. Thanks,
Andy Kaiser.
HOW TO ORDER
|
To order one or more of my calls I can be contacted by email at andy@kaiserkalls.com or by phone at 812-897-1005.
Below is my address for your convenience:
Andy Kaiser
1108 Ratliff CT.
Boonville, IN 47601 |
| CALLS |
All calls are $60.00.
Regardless of the surface or the type of wood that the pot is turned from.
If an Ebony Striker is included with the call there is an extra
$5.00 charge. |
| STRIKERS |
Ebony
Strikers, when available, are $15.00.
Additional strikers are available
for $12.00 plus shipping. |
Some of my most popular calls are pictured below.
I will be adding additional calls as I get them turned. This
is not all that is available as far as wood choices, but what I
would usually recommend. Some other woods work just as well
for particular surfaces as the woods pictured.
 |
GS-1
By far my most popular call, the GS-1 was
designed in 2005 and is still made to the same specs today.
It is a crystal calling surface set in a Curly Maple pot.
This wood is part of a log that I harvested in 2003.
The call has a Purpleheart soundboard and comes with a
Purpleheart striker. The GS-1 has plenty of rasp and
volume, but can also be ran as quiet as you want. I
have had more luck with this call over the years than any
other that I have used. |
 |
LG-1
This is my Bocote Copper.
Designed with the help of Larry Gresser of
Prairie Game Calls, this 3" Copper calling surface is probably like nothing you have heard before!! A great rasp and
consistent sound is what is found in the 3" copper call.
It is pictured with a Bocote striker. Other
strikers that work well are Ironwood, Purpleheart and Osage. |
 |
GS-2
Newly Designed for 2012!!
This call is a Curly Maple pot with a glass
calling surface. The call has a Canarywood soundboard and
comes with a Purpleheart striker. The call produces a
medium-high to high pitch and some
excellent rasp. |
 |
This
Curly Maple pot has a ceramic calling surface and matching
Curly Maple striker. Ceramic is becoming very popular
among custom callmakers. The sound out of this pot, in
my opinion, is right between a glass and slate call.
Medium-high pitch and some very good rasp. Other
strikers that work well on the ceramic surface are
Dymondwood, Purpleheart, Osage and Zebrawood. |
 |
 |
TS-1
This call is a Zebrawood Pot with glass
calling surface on top with an additional slate calling
surface on the bottom. Probably the most versitile
call that I make. The call has a cherry soundboard.
With the matching Zebrawood striker, this call gives you a
nice medium-high pitch with some rasp on the top surface and
a softer less rasp sound out of the slate surface. |
 |
 |
This is a Black Stabilized
Boxelder ceramic call matched with a Spectraply striker.
This call is Medium-high pitch with good rasp and playable
at any volume. Other strikers that work well on the
surface are Dymondwood, Purpleheart, Osage and Zebrawood.
Another suface that works well with the wood
is a 3 1/4" glass.
*Wood is not always available. |
|
